Warenkorb anzeigen (0 Artikel) Mein KontoMerkzettel anzeigenZur Kasse gehen

Glow Worm Pigmente

Glow Wurm für UV-Schwarzlicht Effekte

Glow Worm® phosphoreszierende Pulver können Smooth-On flüssigen Kunststoffen, Gummi und Schaumstoffe hinzugefügt werden, um Gussteile zu schaffen welche im Dunkeln leuchten, nachdem sie mit Licht aufgeladen sind. Wählen Sie entweder grün oder blau.

Nach bestimmungsgemässer Verwendung und aufgeladen, wie empfohlen, werden Gussteile mit Glow Worm® Pulver mindestens 10-mal länger als andere glüh-Pulver im Dunkeln leuchten.

Glow-in-the-dark Gußteile für Halloween Theming-Displays, zu Hause Hobby-Projekte, Aquarium, Laden-Displays und vieles mehr verwendet.
Diese Materialien sind dazu für die industrielle Kennzeichnung, kommunale Sicherheitsanwendungen und vieles mehr geeignet.

Technical Bulletin Glow Worm
safety data sheet MSDS


safety data sheet MSDS

Glow Wurm Pigments

  • Glow Wurm Blue /170gram

    Glow Worm® Blue- 6oz Phosphorescent Glow-In-The-Dark Blue/Green Powder Recommended Mix Ratio by Volume: 1A + 1B + 1 Part Powder.

    31,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • Glow Wurm Green /170gram

    Glow Worm® Blue- 6oz Phosphorescent Glow-In-The-Dark Green/Yellow Powder Recommended Mix Ratio by Volume: 1A + 1B + 1 Part Powder.

    50,20 EUR (zzgl. 21% USt. zzgl. Versand)

  • Glow Worm Blue /1kg

    Glow Worm® Blue- Phosphorescent Glow-In-The-Dark Blue/Green Powder Recommended Mix Ratio by Volume: 1A + 1B + 1 Part Powder. Jar 1 kg.

    189,55 EUR (zzgl. 0% USt. zzgl. Versand)

  • Glow Worm Green /1kg

    Glow Worm® Green- Phosphorescent Glow-In-The-Dark Blue/Green Powder Recommended Mix Ratio by Volume: 1A + 1B + 1 Part Powder. Jar 1 kg.

    204,55 EUR (zzgl. 0% USt. zzgl. Versand)

Instructions
For best results, use Glow Worm® powders with a fast-curing translucent resin such as Smooth-Cast® 325. The fast curing resin allows uniform filler dispersion throughout the finished casting. If the resin system is too slow, fillers may settle unevenly in the finished casting. Glow Worm® powders can also be added to translucent / clear silicone rubbers such as Dragon Skin® or EcoFlex® Series for glow in the dark props that are soft and flexible. Glow Worm® powders can also be blended to create additional finished effects.

Directions for Use – Pre-mix all liquid resin, rubber or foam before dispensing. Store and use all materials at or near 73°F/23°C. Glow Worm® powders must be kept dry (see ’Guarding Against Moisture’ section). Use with adequate ventilation. Read and follow directions for material used to mix with Glow Worm® powders. The following example features SmoothCast® 325 (A+B) mixed with Glow Worm® powder. The powder must be thoroughly dispersed into a two component liquid resin or rubber to a uniform consistency.

Recommended Mix Ratio by Volume: 1A + 1B + 1 Part Glow Worm® powder.

By Volume Mixing & Casting Procedure:

Dispense 1 cup of Smooth-Cast® 325 Part B into a clean mixing container.
Dispense 1 cup Glow Worm® powder into mixing container.
Mix thoroughly.
Dispense 1 cup of Smooth-Cast® 325 Part A into mixing container.
Mix for 30 seconds until all filler particles are dispersed and pour into rubber mold.
Lower Your Cost Per Casting - Glow Worm Powders are Expensive: Mix small amounts as directed above and brush layers into a mold to coat the mold cavity (known as a face coat or gel coat).

Optional: Combine Smooth-Cast®/Glow Worm® mixture with 1 part Ure-Fil® 11 to increase brushability of gel coat. Follow by backfilling with straight resin or foam.

The glow effect will be the same vs. a solid casting and material cost will be greatly reduced.

Guarding Against Moisture – All powders will absorb atmospheric moisture over time which will react with urethane resins. If you notice a moisture reaction between resin and powder or suspect that your Glow Worm® powder contains moisture, you can remedy by spreading powder evenly over a metal cookie sheet at ¼” (0.6 cm) thickness and bake in oven for 4 hours at 150° F/60° C. Allow to cool before mixing powder with resin. Store powder in a tightly closed container in a cool, dry environment with a desiccant pouch (available at your local hobby/arts and crafts store). Replace used desiccant pouches every other time you open container.

Glow Worm® Powders are up to 50% brighter than the competition.

Marken Anwendungsbereich Transportoptionen Kontakt Infos zum Shop New In

Ihr One-Stop-Shop für 3D-Modelling-Materialien