Warenkorb anzeigen (0 Artikel) Mein KontoMerkzettel anzeigenZur Kasse gehen

Derma-tac

Pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin. Derma-tac™ is skin safe and certified by an independent laboratory per OECD Test Guideline 439. This is a low odor formulation which is cosmetic grade and non-irritating

  • Derna-Tac adhesive /28gr

    Derma-tac™ silicone prosthetic adhesive is a pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin.

    26,95 EUR (zzgl. 21% USt. zzgl. Versand)

  • Derma-Tac /112gr

    Derma-tac™ silicone prosthetic adhesive is a pressure sensitive adhesive designed for temporarily adhering silicone and latex makeup prosthetic appliances to the skin.

    83,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • Derma-Tac Remover /112gr

    Derma-tac™ Remover is an easy-to-use one component liquid that will dissolve Derma-tac™ and aid in removing appliances from the skin.

    13,80 EUR (zzgl. 21% USt. zzgl. Versand)

  • Derma-Tac Remover /360gr

    Derma-tac™ Remover is an easy-to-use one component liquid that will dissolve Derma-tac™ and aid in removing appliances from the skin.

    41,20 EUR (zzgl. 21% USt. zzgl. Versand)

Instructions

PREPARATION...
Important: Shake Derma-tac™ container well before using.

Preparation - Clean the skin with soap and water to remove any oils which may affect the bond of the Derma-tac™ adhesive. Allow skin to dry completely.

APPLICATION & REMOVAL...
Acclerating / Lowering Viscosity – Drying time can be reduced with NOVOCS Gloss Silicone Solvent. Adding 10% NOVOCS gloss by weight will lower viscosity and reduce dry time by about ½.
Application - Derma-tac™ adhesive can be applied using a cotton swab, non-latex makeup sponge or suitable makeup brush. Apply adhesive to the surface of the skin or appliance. When applying on areas of high stretch or movement, such as around the mouth, adhesive can be applied to both the skin and the appliance.
Important: Allow Derma-tac™ to evaporate completely. This adhesive will not work unless it has thoroughly dried. Once Derma-tac™ has dried, press the makeup appliance in place. Derma-tac™ is a pressure sensitive adhesive, the firmer you press, the better the adhesive bond.
Appliance Removal Using Derma-tac™ Remover - Apply Derma-tac™ Remover using a cotton swab, cotton ball or suitable makeup brush. Work the Derma-tac™ remover under the edges of the appliance and onto the skin. work the appliance away from the skin slowly, taking particular care around the eyes, nose and mouth.
Once the Derma-tac™ has been removed, the skin should be cleaned and moisturized using a cosmetic cleanser and moisturizer.

Hilfe bei der Auswahl

Produkte nach Anwendung sortiert, z. B.:Lifecasting, Bildhauerei, Gießen, Special FX Make-up, Zahnprothesen Special FX, Studium.

  • Abformen

    Eine Reihe von flexiblen und starren Formmassen.

  • Gießen

    eine breite Palette von flexiblen und starren Guss-Materialien.

  • special properties

  • Schaumstoff

    flüssige flexible und starre Schaumstoffe, starre Schaumblöcke, von vielen Arten und Mengen.

  • Renovierung

    für die Restaurierung von Innen- und Außenverzierungen und Gebäuden.

  • faux Bronze, Marmor, usw.

    Füllstoffe für Kaltguss;l Kunststoff als auch Metall- und Steinpulver.

  • Verbundwerkstoffe

    aus zwei oder mehr Bestandteilen für zusätzliche Qualitäten.

  • Prototyping

    Harze und andere Materialien für Rapid Prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

Marken Anwendungsbereich Transportoptionen Kontakt Infos zum Shop New In

Ihr One-Stop-Shop für 3D-Modelling-Materialien