Warenkorb anzeigen (0 Artikel) Mein KontoMerkzettel anzeigenZur Kasse gehen

FormX Werkzeuge

High Quality steel sculpting tools

FormX SFX Tools Series

FormX SFX Tool Series

  • FT8614 Line tool

    A single sided tool with 3 prongs in a strong stainless steel handle. You can quickly add lots of wrinkles to larger areas by dragging the end back and forth across the area to be textured. It is a...

    5,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8243 Mini rakes - set of 4

    This unique set of sculpture rake tools is designed to refine forms after the initial raking with rougher rakes is done. Made from strong wire inbedded in stainless stell tubing which in turn is pl...

    16,00 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8124 - Rake, Large, Saw Blade

    This Large Rake Tool is great for blocking out sculptures and taking down rough areas quickly and easily. It works well on most sculpting materials. This tool has a round side and a flat side to fi...

    7,00 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8612 Pore tool - Round - Large

    Pore tool with strong stainless steel handle. Pore tools are for adding realistic skin pore detail to your sculpture. It is recommended to lay plastic wrap over the area to be textured, and to simp...

    4,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8244 Detail Set - 2 pieces

    This detail set is for those small sculptures or detailed prosthetic work. The four tips consist of Flat, Slant, Round and Point and are made from very fine wire. Handle the tools with care as they...

    8,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8123 - Rake, Large, Bass Wire

    This is used for refining the roughed out areas of your sculpture, especially after using our "Rake, Large, Saw Blade" Tool. It works well with most sculpting materials. Made from bass wire in a st...

    5,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8613 - Pore Tool - Bass Wire

    Pore Tool in strong staonless steel handle. Pore tools are for adding realistic skin pore detail to your sculpture. This tool is for creating the short dash-like lines that are found on the face ar...

    4,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8611 Pore tool - Round - Small

    Pore tool in strong stainless steel handle. Pore tools are for adding realistic skin pore detail to your sculpture. This tool is ideal for smaller areas and nasal detail, as it has 4 points. It is ...

    4,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8216 - Detail Rake - Jewlers Saw

    Double end Jeweler Blade Rake with sturdy stainless steel handle. These rakes, made from fine jeweler blades, are great for prosthetic sculpting. It is recommended to file the tips down so they are...

    5,50 EUR (zzgl. 21% USt. zzgl. Versand)

Loop tool

FormX loop tool FT81 serie

  • FT8124 - Rake, Large, Saw Blade

    This Large Rake Tool is great for blocking out sculptures and taking down rough areas quickly and easily. It works well on most sculpting materials. This tool has a round side and a flat side to fi...

    7,00 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8123 - Rake, Large, Bass Wire

    This is used for refining the roughed out areas of your sculpture, especially after using our "Rake, Large, Saw Blade" Tool. It works well with most sculpting materials. Made from bass wire in a st...

    5,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8111 - Double sided rake tool, steel tube - 16cm

    FT8111 - Double sided rake tool, steel tube - 16cm

    5,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8112 - Double sided rake tool, steel tube - 16cm

    FT8112 - Double sided rake tool, steel tube - 16cm

    5,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8121 - Single loop tool, steel handle - 17cm

    FT8121 - Single sided loop tool, steel handle - 17cm

    17,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8122 - Wire Modeling Tool 17,5cm

    FT8122 - Wire Modeling Tool 17,5cm

    6,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8131 - Double sided loop tool steel handle -25cm

    FT8131 - Double sided loop tool steel handle - 25cm

    17,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8132 - Double loop tool, steel handle - 28cm

    FT8132 - Double loop tool, steel handle - 28cm

    17,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8133 - Double loop tool, steel handle - 28cm

    FT8133 - Double sided wire loop tool, steel handle - 28cm

    17,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8134 - Clay Designer Tool 25cm

    Clay Designer Tool FT8134 25cm

    7,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8135 - Clay Designer Tool 25cm

    Clay Designer Tool FT8135 25cm

    7,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • 3 part Loop Tool Set

    3 part Loop Tool Set

    16,20 EUR (zzgl. 21% USt. zzgl. Versand)

Detail wire tool

FormX detail wire tool-FT82 serie

  • FT8243 Mini rakes - set of 4

    This unique set of sculpture rake tools is designed to refine forms after the initial raking with rougher rakes is done. Made from strong wire inbedded in stainless stell tubing which in turn is pl...

    16,00 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8244 Detail Set - 2 pieces

    This detail set is for those small sculptures or detailed prosthetic work. The four tips consist of Flat, Slant, Round and Point and are made from very fine wire. Handle the tools with care as they...

    8,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8211 - Detail Wire tool, two-sided - 14,5cm

    FT8211 - Detail Wire tool, two-sided - 14,5cm

    3,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8212 - Detail Wire tool, two-sided - 14,5cm

    FT8212 - Detail Wire tool, two-sided - 14,5cm

    3,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8213 - Detail Wire tool, two-sided 14,5cm

    FT8213 - Detail wire tool, Two Sided - 14,5cm

    3,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8216 - Detail Rake - Jewlers Saw

    Double end Jeweler Blade Rake with sturdy stainless steel handle. These rakes, made from fine jeweler blades, are great for prosthetic sculpting. It is recommended to file the tips down so they are...

    5,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8214 - Detail Wire tool, two-sided - 14,5cm

    FT8214 - Detail Wire tool, two-sided - 14,5cm

    3,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8215 - Detail Wire tool, two-sided - 14,5cm

    FT8215 - Detail Wire tool, two-sided - 14,5cm

    3,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8231 - Wire tool, two-sided - 29cm

    FT8231 - Wire tool, two-sided - 29cm

    15,40 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8241 - Wire tool, set; 7 pieces - 18cm

    FT8241 - Wire tool, set; 7 pieces - 18cm

    17,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8242 - Loop Tools 6 piece set - 14cm

    FT8242 - Loop Tools 6 piece set - 14cm

    18,70 EUR (zzgl. 21% USt. zzgl. Versand)

Spatula's

FormX Spatula's-FT83 serie

  • FT8312 - Double Spatula

    Hard Stailess Steel Plaster Tool Double Spatula FT8312 18cm

    4,20 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8331 - Wax Spatula, double sided - 23cm

    FT8331 - Wax Spatula, double sided - 23cm

    5,95 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8332 - Wax Spatula, double sided - 23,5cm

    FT8332 - Wax Spatula, double sided - 23,5cm

    7,70 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8333 - modeling tool, metal - 23,5cm

    FT8333 - modeling tool, metal - 23,5cm

    7,70 EUR (zzgl. 21% USt. zzgl. Versand)

Wax tools

FormX wax tools-FT84 serie

  • FT8411 - Wax tool - 14cm

    FT8411 - Wax tool - 14cm

    2,90 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8412 - Wax tool - 16cm

    FT8412 - Wax tool - 16cm

    3,95 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8413 - Wax tool - 16,5cm

    FT8413 - Wax tool - 16,5cm

    3,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8414 - Wax tool - 15cm

    FT8414 - Wax tool - 15cm

    3,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8421 - modeling tool, metal - 17cm

    FT8421 - Smooth, Polished, metal modeling tool, double sided - 17cm

    4,95 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8422 - modeling tool, metal - 17cm

    FT8422 - modeling tool, metal - 17cm

    7,70 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8423 - Steel modelling tool 15cm

    Steel modelling tool FT8423 15cm

    4,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8424 - Steel Clay tool12,5cm

    FT8424 - Steel Clay tool12,5cm

    3,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8431 - Wax Spatula, double sided - 22,5cm

    FT8431 - Wax Spatula, double sided - 22,5cm

    7,70 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8432 - Wax Spatula, double sided - 23,5cm

    FT8432 - Wax Spatula, double sided - 23,5cm

    7,70 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8433 - Steel dental tool 16,5cm

    FT8433 - Steel dental tool 16,5cm

    3,05 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8434 - Plaster Tool Spatula

    French material Plaster Tool Spatula FT8434 18,5cm

    4,20 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8435 - French material Plaster Tool Spatula

    French material Plaster Tool Spatula FT8435 17cm

    4,80 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8436 - Wax modeling Tool 18,5cm

    Wax modeling Tool FT8436 18,5cm

    2,50 EUR (zzgl. 21% USt. zzgl. Versand)

Rasps

FormX rasps-FT85 serie

  • FT8521 - Plaster/soapstone rasp, two-sided - 20cm

    FT8521 - Plaster/soapstone rasp, two-sided - 20cm

    9,25 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8425 - Metal Clean-Up Tool Spatula 17cm

    FT8425 - Metal Clean-Up Tool Spatula 17cm

    3,10 EUR (zzgl. 21% USt. zzgl. Versand)

Textureing Tools

FormX Texturing-FT86 serie

  • FT8521 - Plaster/soapstone rasp, two-sided - 20cm

    FT8521 - Plaster/soapstone rasp, two-sided - 20cm

    9,25 EUR (zzgl. 21% USt. zzgl. Versand)

  • FT8425 - Metal Clean-Up Tool Spatula 17cm

    FT8425 - Metal Clean-Up Tool Spatula 17cm

    3,10 EUR (zzgl. 21% USt. zzgl. Versand)

Hilfe bei der Auswahl

Produkte nach Anwendung sortiert, z. B.:Lifecasting, Bildhauerei, Gießen, Special FX Make-up, Zahnprothesen Special FX, Studium.

  • Abformen

    Eine Reihe von flexiblen und starren Formmassen.

  • Epoxy-Modellierung

    Zweikomponenten-Epoxy-Putten für die Modellierung.

  • faux Bronze, Marmor, usw.

    Füllstoffe für Kaltguss;l Kunststoff als auch Metall- und Steinpulver.

  • Gießmaterial

    eine breite Palette von flexiblen und starren Guss-Materialien.

  • Halbharte Kunststoffe

    halbsteifen Kunststoffen mit ausgezeichneter Schlagzähigkeit.

  • Körperabformung

    Alginat, Silikone und Gipsbinden für Körperabformung.

  • Performance-Harze

    für eine Vielzahl von Projekten ein zu setzen, gut für industrielle Anwendungen geeignet.

  • Prototyping

    Harze und andere Materialien für Rapid Prototyping.

  • Renovierung

    für die Restaurierung von Innen- und Außenverzierungen und Gebäuden.

  • Schaumstoff

    flüssige flexible und starre Schaumstoffe, starre Schaumblöcke, von vielen Arten und Mengen.

  • Streichfähige Kunststoffe

    die gebürstet werden können.

  • Transparente Produkte

    Materialien mit einem wasserklaren, lichtdurchlässigen oder transparenten Aussehen.

  • Unterstützungshülle

    diese Materialien werden für Mutterformen und Stützschalen verwendet.

  • Verbundwerkstoffe

    aus zwei oder mehr Bestandteilen für zusätzliche Qualitäten.

  • Zubehör

    Lösemittel, Trennmittel, Werkzeuge und vieles mehr .

Marken Anwendungsbereich Transportoptionen Kontakt Infos zum Shop New In

Ihr One-Stop-Shop für 3D-Modelling-Materialien