Trenn- und Lösungsmittel

Release Agents for Moldmaking & Casting

We carry a full range of release agents to cover many applications. Aerosols and Non-Aerosol, Solvent Based or Water Based; made especially for Mold Making and Casting.

One Step® Release Agent And Sealer seals and releases porous originals in one step.

Ease Release® Release Agent covers nearly every moldmaking and casting application.

In & Out® II Water Based Concrete Release Agent is an economical concentrate for releasing concrete castings from Smooth-On rubber molds. Does not affect surface detail of castings. Prolongs mold life.

Universal Mold Release® will release polyurethane mold rubbers from properly prepared models. Not for use with silicones.

One Step

One Step® is a convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent during the mold making process using Smooth-On urethane mold rubbers.

One Step® will facilitate the release of cured urethane mold rubber from plaster, concrete, stone, brick, marble, limestone, wood, metal and other surfaces. Do not use on modeling clays.

One Step

OneStep sealer-release /800gr 14,50 EUR (zzgl. 21% USt. zzgl. Versand)

One Step sealer-release /360gr Convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent... 24,55 EUR (zzgl. 21% USt. zzgl. Versand)

In & Out

IN & OUT® II water soluble release agent will aid in releasing concrete or gypsum plaster castings from Smooth-On rubber molds. IN & OUT® II provides a clean, positive release and does not interfere with or affect surface detail and helps minimize air bubbles in finished castings. Simplify Your Production Casting With IN & OUT II®
Will Not Stain / Soften Concrete Or Gypsum Surfaces
Mix With Water - Economical
Will Not Affect Color Pigmenting Of Cast Concrete
Minimizes “Bug Holes” In Concrete And Air Bubbles In Gypsum Castings
Keeps Molds Clean - Does Not Build Up
Significantly Extends Mold Life
IN & OUT® II IS DILUTED WITH WATER. Mix 4 parts water to 1 part In & Out® II. Mixing can be done by hand or slow speed mixer. Do not shake or agitate as this may cause product to foam. How you dilute IN & OUT® II (amount mixed with water, coverage and frequency of application) will depend on the concrete aggregate mix and the form material you are casting into. For example, when casting concrete with a low grit/high sand content (minimal abrasion) into a polyurethane mold, the mix ratio of water to IN & OUT II® can be 4 : 1. High grit content may call for a dilution ratio of 2 parts water to 1 part release agent. Mix only amount needed for one day. Mixture may separate after 24 hours. Re-mix to a uniform consistency and apply.

In & Out

In&Out Concrete Release Agent /3,4 kgs IN & OUT® II water soluble release agent will aid in releasing concrete or gypsum plaster castings from Smooth-On rubber molds. 57,09 EUR (zzgl. 21% USt. zzgl. Versand)

In & Out Concrete Release Agent /18,2 ltr IN & OUT® II water soluble release agent will aid in releasing concrete or gypsum plaster castings from Smooth-On rubber molds. 253,93 EUR (zzgl. 21% USt. zzgl. Versand)

In & Out II water Suluable Release Agent for Concr IN & OUT II water soluble release agent will aid in releasing concrete or gypsum plaster castings from Smooth-On rubber molds. IN & OUT II provides a clean, positive release and does not interfer... 7,50 EUR (zzgl. 21% USt. zzgl. Versand)

Universal Mold Release

Universal Mold Release® is formulated especially for mold making and casting, and works well with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes and polysulfides) from properly prepared models. Sealing porous models (wood, plaster, concrete) or certain modeling clays (containing water or sulfur) with Smooth-On SuperSeal® or other sealer may be necessary. If using silicone rubber, seal model surface with SuperSeal® only. Do not use UMR.UMR also easily releases a variety of casting materials (epoxies, Smooth-On liquid plastics, etc.) from cured rubber molds. Properly used, Universal Mold Release improves molding efficiency for a variety of casting applications and will actually lengthen the life of your production mold.
Available in aerosol or bulk liquid.

Universal Mold Release

Universal Mold Release aerosol /400gr Silicon based Universal release agent - aerosol, without ozone gas - spraycan 400 grams 12,80 EUR (zzgl. 21% USt. zzgl. Versand)

Universal mold release liquid /100ml Universal mold release liquid, 100 ml. 5,63 EUR (zzgl. 21% USt. zzgl. Versand)

Universal Mold Release 1 gallon 2,77 kg 59,31 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 200 & 205

Ease Release® 200 and 205 is an excellent general purpose release agent for making molds and casting parts. This product will release urethane rubber, urethane resins, polyester resins, RTV silicones, and thermoplastic polymers. Ease Release® 200 and 205 is effective on urethane, silicone and metal molds.

Ideal For Releasing:
~ Urethane Rubber From Original Models
~ Urethane Plastic From Urethane Rubber
~ Silicone Rubber From Original Models
~ Silicone Rubber From Silicone Rubber
~ Urethane Plastic From Silicone Rubber

NOT FOR USE WITH URETHANE FOAMS For releasing foam, use Ease Release 2831

Ease Release

Ease Release 200 aerosol /400gr Ease Release 200 spraycan, toepassingsbereik: Polyurethaan, epoxy, polyester, PU-schuim, siliconen. Oppervlak, satijn. 16,00 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 205 2-oz 8,90 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 205 /13,66 kg Liquid version of Ease Release 200. Removable release agent - silicone based - Bucket 13,66 kgs. 261,88 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 300 aerosol /400gr Losmiddel voor P.U., epoxy, polyester, RTV silicone rubbers en thermoplastics. afwerking: mat 13,20 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 305 /2,27kg Ease Release 305 1 gallon (6lbs=2,72kg) 57,45 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 305 /13,6kg Ease Release 305 5 gallon pail 189,63 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 400 aerosol /400gr aerosol losmiddel op basis van siliconen - spuitbus 400 gram 13,40 EUR (zzgl. 21% USt. zzgl. Versand)

Ease Release 500 aerosol /400gr aerosol losmiddel op basis van teflon - spuitbus 400 gram 15,80 EUR (zzgl. 21% USt. zzgl. Versand)

ER 2831

Ease Release® 2831 is a wax-based non-silicone liquid release agent. It has proven to be effective when used to release polyurethane foams. This wax dispersion is designed to operate at mold temperatures ranging from 160°F to 200°F with minimal wax build-up. EASE RELEASE 2831 works with aluminum, steel, and elastomeric mold construction. Looking for a different Mann product? View the Mann mold release agent product line.

Ease Release 2831

ER2831 pint Ease Release 2831 Seal- & releaseagent waxbased 0,3 kgs. 20,50 EUR (zzgl. 21% USt. zzgl. Versand)

Other release agents

Acmos 82 aerosol /400gr Acmos 82-2405 Afwasbaar universeellosmiddel/ op wasbasis/spuitbus 400 gram 12,00 EUR (zzgl. 21% USt. zzgl. Versand)

Losmiddel 82-863-3 1ltr 17,40 EUR (zzgl. 21% USt. zzgl. Versand)

PVA /500ml PVA (Polyvinylalcohol) Release agent for polyester - 500ml can 6,80 EUR (zzgl. 21% USt. zzgl. Versand)

PVA /1ltr PVA (Polyvinylalcohol) Release agent for polyester - 1 liter can. 10,80 EUR (zzgl. 21% USt. zzgl. Versand)

Plaster Seperator /500ml Gypsum release agent for use with plaster-against-plaster applications. Is used in prosthetic design: coated over a fresh lifecast it will create a barier that will "float off" a plastiline sculpture ... 14,95 EUR (zzgl. 21% USt. zzgl. Versand)

Royal JeL-E, 115 gr Royal JeL-E, Release agent for casting silicone in silicone, 115 gr pot 10,15 EUR (zzgl. 21% USt. zzgl. Versand)

U12 Mold Rinse and Release /3,6 kg 71,60 EUR (zzgl. 21% USt. zzgl. Versand)

U-10 Mold Release /1ltr U-10 Mold Release. To apply in your rubber mold before casting plaster. Bottle 1 liter. 32,58 EUR (zzgl. 21% USt. zzgl. Versand)

Vaseline /250gr Vaseline 250 gram, petroleum jelly. 3,29 EUR (zzgl. 21% USt. zzgl. Versand)

Vaseline 1kg Vaseline 1 kg 9,76 EUR (zzgl. 21% USt. zzgl. Versand)

Silicone Pump Spray To facilitate removal of organic materials from inorganic surfaces 14,50 EUR (zzgl. 21% USt. zzgl. Versand)

Sealing Agents For Use On Porous Models

One Step® Release Agent And Sealer seals and releases porous originals in one step.

SuperSeal® was developed as an economical, fast-drying sealing agent for a variety of surfaces including modeling clays, gypsum plasters, concrete and wood.

Sonite® Wax is a soft paste wax used to seal porous surfaces and will aid in releasing urethane mold rubber from a variety of model surfaces, plastics from plastics and other industrial applications.

Super Seal

SuperSealTM was developed as an economical, fast-drying sealing agent for a variety of surfaces including modeling clays, gypsum plasters, concrete and wood.

This sealing agent will quickly and effectively seal surfaces without interfering with surface detail. The new formula offers better performance and faster evaporation. Mold rubber can then be applied.

This product incurs a ground hazard shipping fee when shipped in the gallon size.

Super Seal

SuperSeal /500ml SuperSeal - sealing and release agent - 500ml can 21,90 EUR (zzgl. 21% USt. zzgl. Versand)

Super Seal Kit SuperSeal & Ease Release 205 Combo Pack One 2-oz. spritzer bottle each of Super Seal & Ease Release 205 Net Weight : 0.25 Lbs. /0,15 kgs 9,50 EUR (zzgl. 21% USt. zzgl. Versand)

One Step

One Step® is a convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent during the mold making process using Smooth-On urethane mold rubbers.

One Step® will facilitate the release of cured urethane mold rubber from plaster, concrete, stone, brick, marble, limestone, wood, metal and other surfaces. Do not use on modeling clays.

One Step

OneStep sealer-release /800gr 14,50 EUR (zzgl. 21% USt. zzgl. Versand)

Sonite wax

Sonite® Wax is a soft paste wax used to seal porous surfaces and will aid in releasing urethane mold rubber from a variety of model surfaces, plastics from plastics and other industrial applications. (It may be necessary to follow application of Sonite® Wax with suitable mold release agent such as Universal Mold Release®). Consult technical bulletin of mold rubber product for complete details

Sonite

Sonite Wax 100 grams 7,00 EUR (zzgl. 21% USt. zzgl. Versand)

Sonite Wax 1-Quart Kit 0,8 kg 17,80 EUR (zzgl. 21% USt. zzgl. Versand)

Sonite Wax /3kgs Sonite Wax universal release agent wax - bucket 3 kgs. 50,40 EUR (zzgl. 21% USt. zzgl. Versand)

Sonite Wax /15,88 kg 143,40 EUR (zzgl. 21% USt. zzgl. Versand)

U-10 Soap solution

U-10 Soap Solution , Zeeplossingsmiddel liter 12,50 EUR (zzgl. 21% USt. zzgl. Versand)

Kwikee® Non-Aerosol Sprayer

The Kwikee® sprayer is an economical alternative to aerosols for dispensing release agents and sealing agents. It is a faster, labor-saving way to cover large models or molds and delivers sealing agent or release agent in a fine mist.

Kwikee Sprayer

Kwikee Sprayer - 946 ml Pressure Sprayer The Kwikee sprayer is an economical alternative to aerosols for dispensing release agents and sealing agents. It is a faster, labor-saving way to cover large models or molds and delivers sealing a... 75,60 EUR (zzgl. 21% USt. zzgl. Versand)