Warenkorb anzeigen (0 Artikel) Mein KontoMerkzettel anzeigenZur Kasse gehen

MoldStar

Mold Star Serien

sind weiche und sehr starke Silikonkautschuk. Dieser Kautschuk ist reißfest und hat sehr wenig langfristige Schrumpfung. Formen von Mold Star ® sind gut für das Gießen von Wachs, Gips, Harze, Beton und anderen Materialien. Die gehärtete Form ist hitzebeständig bis 450 ° F (232 ° C) und eignet sich zum Gießen von niedrig Temperatur schmelzenden Metall-Legierungen.
Hinweis: Die THI-VEX ® ist nicht mit Star-kompatibel

Mold ®-Kautschuk ist einfach 1A : 1B nach Volumen zu mischen (keine Waage nötig) und verfügen über relativ niedrige Viskosität. Ein Vakuumentgasung ist derhalbe für die meisten Anwendungen nicht benötigt. Die Topfzeit ist 50 Minuten und Aushärtung beträgt 4 Stunden bei Raumtemperatur. Mold Star ® 16 Fast ist ein schnelleres Material mit einer 6 Minuten Topfzeit und 30 Minuten Aushärtezeit. Mold Star ® 30 ist ein härteres Material mit einer Shore-Härte 30A

Technical bulletin Mols Star 15, 16 and 30
Technical bulletin Mols Star 20T

  • info
  • -15 Slow
  • -16 Fast
  • -20T
  • -30
  • Instructions
  • Mold Star Video

Mold Star Serien Tabelle

product name A:B mixing Ratio Demold Time Elongation at Break Mixed Viscosity Pot Life Shore A Hardness Tear Strength Specific Gravity
Mold Star 15 1:1 by volume 4 hours 440% 12500 cps 50 min 15 88 pli 1.18 kg/lt
Mold Star 16 1:1 by volume 30 min 440% 12500 cps 6 min 16 88 pli 1.18 kg/lt
Mold Star 30 1:1 by volume 6 hours 339% 12500 cps 45 min 30 88 pli 1.21 kg/lt

Mold Star 15 Slow products

  • Mold Star 15 Slow / 0,94 kg

    MIX RATIO: 1A:1B by weight or volume; POT LIFE: 50 mins; CURE TIME: 4 hrs; SHORE HARDNESS: 15A; COLOR: Green Note: This product will not work with modeling clays containing sulfur under any circumstances.

    34,45 EUR (zzgl. 21% USt. zzgl. Versand)

  • Mold Star 15 Slow / 8 kg

    MIX RATIO: 1A:1B by weight or volume; POT LIFE: 50 mins; CURE TIME: 4 hrs; SHORE HARDNESS: 15A; COLOR: Green Note: This product will not work with modeling clays containing sulfur under any circumstances.

    218,65 EUR (zzgl. 21% USt. zzgl. Versand)

Mold Star 16 Fast products

  • Mold Star 16 Fast / 0,94 kg

    MIX RATIO: 1A:1B by weight or volume; POT LIFE: 6 mins; CURE TIME: 30 mins; SHORE HARDNESS: 15A; COLOR: Blue-Green

    34,45 EUR (zzgl. 21% USt. zzgl. Versand)

  • Mold Star 16 Fast / 8 kg

    MIX RATIO: 1A:1B by weight or volume; POT LIFE: 6 mins; CURE TIME: 30 mins; SHORE HARDNESS: 15A; COLOR: Blue-Green

    218,65 EUR (zzgl. 21% USt. zzgl. Versand)

Mold Star 20T products

  • Mold Star 20T / 0,94 kg

    Mold Star 20T ist eine einfache Shore 20A transluzente Platin Silikon, gemischt 1A ist: 1B Volumen (kein Waage erforderlich). Es weist eine relativ niedrige Viskosität auf und eine Vakuumentgasun...

    34,40 EUR (zzgl. 21% USt. zzgl. Versand)

  • Mold Star 20T /7,26kg

    Mold Star 20T ist eine einfache Shore 20A transluzente Platin Silikon, gemischt 1A ist: 1B Volumen (kein Waage erforderlich). Es weist eine relativ niedrige Viskosität auf und eine Vakuumentgasun...

    194,45 EUR (zzgl. 21% USt. zzgl. Versand)

Mold Star 30

  • Mold Star 30 pint unit /1kg

    MIX RATIO: 1A:1B by weight or volume; POT LIFE: 45 mins; CURE TIME: 6 hrs; SHORE HARDNESS: 30A; COLOR: Blue

    34,45 EUR (zzgl. 21% USt. zzgl. Versand)

  • Mold Star 30 gallon unit /8kg

    MIX RATIO: 1A:1B by weight or volume; POT LIFE: 45 mins; CURE TIME: 6 hrs; SHORE HARDNESS: 30A; COLOR: Blue

    218,65 EUR (zzgl. 21% USt. zzgl. Versand)

Note: This product will not cure against surfaces containing sulfur, even when sealed.

Cure Inhibition - Addition cured silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, sulfur clays, certain wood surfaces, newly cast polyester, epoxy or urethane rubber may cause inhibition. If compatibility between the rubber and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed. To prevent inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to thoroughly dry before applying rubber.

If you are not sure if your clay contains sulfur, do a small compatibility test before using for an important project.

Applying A Release Agent - Although not usually necessary, a release agent will make demolding easier when casting into most surfaces. Ease Release™ 200 is a proven release agent for releasing silicone from silicone or other surfaces. Mann Ease Release™ products are available from our Website.

Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Measuring & Mixing - Before you begin, pre-mix Part A and Part B separately. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume), mix thoroughly making sure that you scrape the sides and bottom of the mixing container several times. The rubber should be a uniform color with no streaks.

Optional... Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber. After mixing parts A and B, vacuum material for 2-3 minutes at 29 inches of mercury, making sure that you leave enough room in container for product expansion.

Pouring - For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its own level. A uniform flow will help minimize entrapped air. If using as a mold material, the liquid rubber should level off at least 1/2” (1.3 cm) over the highest point of the model surface.

Heat Curing - Time to demold can be reduced by applying mild heat.
Adding an appropriate amount of Plat-Cat™ cure accelerator will also reduce demold time.
The pot life and cure times can be extended using Slo-Jo™ cure retarder.
Do not cure rubber where temperature is less than 65°F/18°C.

Mold Performance & Storage - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber. Store and use material at room temperature (73°F/23°C). Warmer temperatures will drastically reduce working time and cure time. Storing material at warmer temperatures will also reduce the usable shelf life of unused material. These products have a limited shelf life and should be used as soon as possible.

  • ++
  • Mischen, Messen & Wägen
  • Pinsel
  • Schutzausrüstung
  • Trennmittel

You might also need...

  • Mixing Beakers
  • Measuring Cups & Jars
  • Weighting devices
  • Brushes
  • Protective Gear such as gloves
  • Release agents

Messen, Wiegen und Mischen

Mixing

  • Measuring cup /30ml

    Measuring cup 30ml + graduation

    0,20 EUR (zzgl. 21% USt. zzgl. Versand)

  • Measuring cup /125ml

    Measuring cup 125 ML + Graduation

    0,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • SO mixing cup /473ml

    Mixing and measuringbeaker 16 oz/473 ml with measuringindication

    0,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • SO mixing cup /946ml

    Mixing and measuringbeaker 32 oz/946 ml with measuringindication

    1,00 EUR (zzgl. 21% USt. zzgl. Versand)

  • SO mixing cup /1892ml

    Mixing and measuring beaker 64 oz/1892 ml with measuringinformation

    2,15 EUR (zzgl. 21% USt. zzgl. Versand)

  • SO mixing cup /4880ml

    Mixing and measuring beaker 165 oz/4880 ml with measuringinformation

    3,15 EUR (zzgl. 21% USt. zzgl. Versand)

  • Turbine Mixer

    Turbinenmischer können verwendet werden, um zweikomponentige Verbindungen schnell zu mischen

    12,24 EUR (zzgl. 21% USt. zzgl. Versand)

Mixing

Mixing

Pinsel

  • flat brush 30mm

    flache Einwegbürsten - 30 mm - pro Stück

    0,85 EUR (zzgl. 21% USt. zzgl. Versand)

  • flat brush 40mm

    flache Einwegbürsten - 40 mm - pro Stück

    0,95 EUR (zzgl. 21% USt. zzgl. Versand)

  • flat brush 50mm

    flache Einwegbürsten - 50 mm - pro Stück

    1,15 EUR (zzgl. 21% USt. zzgl. Versand)

  • flat brush 60mm

    flache Einwegbürsten - 60 mm - pro Stück

    1,45 EUR (zzgl. 21% USt. zzgl. Versand)

  • flat brush 70mm

    flache Einwegbürsten - 70 mm - pro Stück

    1,55 EUR (zzgl. 21% USt. zzgl. Versand)

  • Calupaint Platte kwast Super Prof gelakte houten s

    Calupaint Platte kwast Super Prof gelakte houten s

    2,15 EUR (zzgl. 21% USt. zzgl. Versand)

Sicherheit

  • Glove Vinyl Large /box 100pcs

    Glove Vinyl Large/Box of 100 pcs.

    10,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • Glove Vinyl Medium /box 100pcs

    Glove Vinyl Medium/Box of 100 pcs.

    10,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • Glove Vinyl Small /box 100pcs

    Glove Vinyl Small/Box of 100 pcs.

    9,45 EUR (zzgl. 21% USt. zzgl. Versand)

  • Glove Vinyl X-Large /box 100pcs

    Handschoen Vinyl XL doos 100 stuks

    10,75 EUR (zzgl. 21% USt. zzgl. Versand)

  • Stenchmask carbon fibre

    Stenchmask carbon fibre

    5,60 EUR (zzgl. 21% USt. zzgl. Versand)

  • Supergloves Large Latex /box 100pcs

    Supergloves Large Latex box 100 pcs

    11,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • Supergloves Latex small /box 100pcs

    Latex medical gloves, small, box of 100 pcs.

    11,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • Supergloves Latex Medium /box 100pcs

    Latex medical gloves, medium, box of 100 pcs.

    11,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • Supergloves Latex X-Large /box 100pcs

    Latex medical gloves, small, medium, large, xlarge, box of 100 pcs.

    11,50 EUR (zzgl. 21% USt. zzgl. Versand)

  • Filter ABEK1 for 3M 6200 maskers

    Protection against organic vapors, Inorganic and acid gases, Ammonia, and ammonia derivatives of

    19,45 EUR (zzgl. 21% USt. zzgl. Versand)

  • Paint spray mask Colad

    COLAD spray mask is a disposable mask with two active carbon cartridges that protect against the inhalation of organic solvents. The COLAD spray mask should be replaced after 40 hours by a new spra...

    29,25 EUR (zzgl. 21% USt. zzgl. Versand)

  • Paint spray mask - type 6200 - L

    halfgelaatmasker voor verfspuiten - type 6300 - la

    29,95 EUR (zzgl. 21% USt. zzgl. Versand)

  • Paint spray mask - type 6200 - M

    Comfortable and easy to wear paint spray mask. By making a minimum of components. Easy cleaning Due to the large surface area of the filters, a very low breathing resistance arises. The filters a...

    29,95 EUR (zzgl. 21% USt. zzgl. Versand)

  • Paint spray mask - type 6200 - S

    halfgelaatmasker voor verfspuiten - type 6100 - s

    31,08 EUR (zzgl. 21% USt. zzgl. Versand)

  • 3M safety glasses Classic

    3M veiligheidsbril Classic

    12,55 EUR (zzgl. 21% USt. zzgl. Versand)

  • Gas and Vapormask Carbonfilters 3M

    Gas and Vapormask, Carbonfilters, 3M 4251

    45,55 EUR (zzgl. 21% USt. zzgl. Versand)

Release Agents

Spray Releases

  • Acmos 82 aerosol /400gr

    Acmos 82-2405 - Abnehmbares Universal-Trennmittel / Wachs-Aerosol-Spraydose

    12,32 EUR (zzgl. 21% USt. zzgl. Versand)

  • Ease Release 200 aerosol /400gr

    Abnehmbares Aerosoltrennmittel auf Silikonbasis - 400 Gramm Sprühdose

    17,35 EUR (zzgl. 21% USt. zzgl. Versand)

Paste Releases

  • Sonite Wax /3kgs

    Sonite Wax ist ein weiches, pastöses Wachs, das verwendet wird, um poröse Oberflächen zu versiegeln und Urethan-Gummiformen von verschiedenen Oberflächen, Kunststoffen aus Kunststoffen und andere...

    53,90 EUR (zzgl. 21% USt. zzgl. Versand)

  • Universal mold release liquid /100ml

    Universal mold release liquid, 100 ml.

    5,63 EUR (zzgl. 21% USt. zzgl. Versand)

Sealers

Hilfe bei der Auswahl

Produkte nach Anwendung sortiert, z. B.:Lifecasting, Bildhauerei, Gießen, Special FX Make-up, Zahnprothesen Special FX, Studium.

Über uns Kontakt Transportoptionen Kundenprojekte Anwendungsbereich Marken Branches

Ihr One-Stop-Shop für 3D-Modelling-Materialien