Warenkorb anzeigen (0 Artikel) Mein KontoMerkzettel anzeigenZur Kasse gehen

Accu-Cast™ LiquiStone™

Accu-Cast™ LiquiStone™ is an easy to use gypsum cement that can be cast into Accu-Cast™ alginate molds for reproducing human body parts for lifecasting. LiquiStone™ has a convenient mix ratio of 2 parts stone to
1 part water by volume and will have a working time of about 15 minutes. Castings can be demolded in about 3 hours. LiquiStone™ can be cast solid, or can be laid up by hand (thicker consistency required). Fully cured
castings can be machined, sanded, primed and painted.

Mix Ratio: 2 parts LiquiStone™ to 1part water by volume, or 2.3 parts LiquiStone™ to 1 part water by weight

Pot Life: 15 minutes - Demold time: 3 hours* - Full Cure: 24 hrs. - Color: White - Compressive Strength: 6000 psi (41.4 MPa)

Density, Wet: 1762 kg./m3 - Density, Dry: 1442 kg/m3 - % Maximum Expansion: 0.42%

*Depending on mass and water concentration. Data achieved under controlled laboratory conditions with freshly produced material, results may vary

Accu-Cast™ LiquiStone™

  • Accu-Cast™ LiquiStone™ /6,8 kg

    Accu-Cast™ LiquiStone™ /6,8 kg

    20,64 EUR (zzgl. 21% USt. zzgl. Versand)

  • Accu-Cast™ LiquiStone™ /11 kg

    Accu-Cast™ LiquiStone™ /11 kg

    37,45 EUR (zzgl. 21% USt. zzgl. Versand)

Hilfe bei der Auswahl

Produkte nach Anwendung sortiert, z. B.:Lifecasting, Bildhauerei, Gießen, Special FX Make-up, Zahnprothesen Special FX, Studium.

Über uns Kontakt Transportoptionen Kundenprojekte Anwendungsbereich Branches

Ihr One-Stop-Shop für 3D-Modelling-Materialien